emerson-solahd-distributor-logo-gradiant-horizontal.jpeg

SDN1024100P

green-check-icon Total Stock: 1261
blue-timer-icon Drop Ship Quantity: 1250
yellow-timer-icon Factory Lead Time: TBD
onlycheckmark RoHs Compliant
240W 24V DIN S/P 115/230V IN SOLA Part Number SDN1024100P NAED #: 78347215321

$501.00

Min: 1  Mult: 1

Product Attributes

Output Rating

24 VDC

Input AC Range

85-132/176-264 Vac

Input Nominal Voltage

115/230 Vac, Auto select

Input DC Range

85-132/176-264 Vac

Input Nominal Current

5 / 2 A typ.

Input Frequency

47 - 63 Hz

Input Efficiency (Losses)

> 88% typ. (32.7 W)

Input Inrush current max

typ. < 40 A

NAED Number

78347215321

Input Power Factor Correction

Units Fulfill EN61000-3-2

Output Nominal Voltage

24 Vdc (22.5 - 28.5 Vdc adj.)

Output Ripple

< 50 mVpp

Output Current Limit

Fold Forward (Current rises, voltage drops to maintain constant power during overload up to max peak current)

Output Holdup Time

> 20 ms @ full load

Output Nominal Current

10 A (240 W)

Output Tolerance

< ±2% overall (combination Line, load, time and temperature related changes)

Output Overvoltage Protection

< 33 Vdc

Output Parallel Operation

Single or Parallel use is selectable via Front Panel Switch

Warranty

5 year limited warranty

CASE QTY

12.00

Temperature Range

-10C to +60C

EMC Emissions

EN61000-6-3, -4; Class B EN55011, EN55022 Radiated and Conducted including Annex A. EN61000-3-2

General Protection/Safety

Protected against continuous short-circuit, overload, open-circuit. Protection Class 1 (IEC536), degree of protection IP20 (IEC 529) Safe low voltage: SELV (acc. EN60950)

Storage Temperature

-25C to +85C

Humidity

The relative humidity is < 90% RH, noncondensing; IEC 68-2-2, 68-2-3.

Status Indicators

Green LED and DC OK signal (N.O. Solid State Contact rated 200 mA / 60 Vdc)

Carton QTY

1.00

Output Connections

Two connectors per output, connector size range: 16-10 AWG (1.5 - 6 mm2) for solid conductors

Mounting

Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDN-PMBRK2 required).

Input Connections

IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm2 ) for solid conductors. 16-12 AWG (0.5-4 mm2)

Case

Fully enclosed metal housing with fine ventilation grid to keep out small parts.

MTBF

> 600,000 hours

Height

5

Depth

5

Width

4

Not available at this time.